PhoneFlash - Send Vehicle Info To Tuner

To program your car for the first time there are a few initialisation and vehicle identification processes required so that your tuner can link to your account and vehicle. To start the process you should first have completed the ECU Connect After install setup procedure or logged into your account and selected a tuner. If you haven’t the options will be offered during this process, there is a how to video here 

You will also need to have ECU Connect installed and the Bluetooth Vehicle Interface (EVI) plugged into the vehicle OBD port and paired correctly to your device. Then open ECU Connect (if you have multiple EVI-BT’s paired select the correct EVI-BT)

Select My car

When in the main menu select “Program ECU” then “Send Vehicle Info to Tuner”

Select Program ECU

Send Vehicle Info to Tuner

In the “Send Vehicle info” page fill in the details and press “Send To Tuner”.

Enter Details and press send

If your Cal ID is not currently supported there will be more vehicle detail options to fill in and an option to read the engine calibration out of the vehicle so it can be sent to EcuTek and support added.

More information can be found here Rom Dump Procedure.

Hopefully this information helps to get logs to your tuner directly from ECU connect improving not only communication and speed but the quality of logs and reports as well. If you have any further question please send these in to [e-mail].